Tech Coat – Ceramic Coat

Description

Glistening shield

Would you like to protect your car with a special layer and give your vehicle a shiny clean-cut look at the same time? Then have a look at Tech Coat – an advanced, single-component ceramic coat designed for paintwork and wheels. Thanks to Tech Coat properties, the paint stays shiny, protected and looks like brand new for longer. The product is very easy to apply. You will manage even if you are dealing with ceramic coating for the first time in your life!

The 9H hardness level makes it possible to resist micro-scratches, whereas a UV-filter prevents the paint from fading. Thanks to high chemical resistance, it will be easier for you to remove stubborn dirt and avoid hard water spots from appearing on your vehicle. What is more, Tech Coat protects the car body from the damaging effects of bird droppings.

Durable product from Poland

A glossy, sleek finish and excellent hydrophobic properties will satisfy the needs of all automotive enthusiasts. Ceramic coating lasts up to 36 months. During this time, you do not need to apply any other topcoat products. The vehicle will only need regular washing-up and paint/wheel decontamination from time to time. There is no accreditation required as Tech Coat belongs to the CleanTech family. In other words, it is a multipurpose product that you can use on your wheels as well. Tech Coat is an original Polish product. It is produced, mixed and packed in Poland.

Product advantages

Ease of use

Efficient

Hydrophobic

Ready to use

Restores shine

Important information

Dilution

Ready to use

 

Directions for use

  • Prepare the paintwork/wheels of your car – remove tart, rail dust, etc. If necessary, polish the paintwork to eliminate any imperfections.
  • Wipe down the already prepared paintwork with an IPA 50%+ solution. We do not recommend other degreasing products.
  • Apply Tech Coat on small sections (about 40X40cm) with circular movements using the attached applicator (put suede on the applicator). After applying the product, finish off by rubbing it with a microfibre cloth. Remember to polish any smudges left from the first rub.
  • If you have waited too long after putting the rubbing product, apply a little bit of Tech Coat again in the same place and rub it well.

 

Additional recommendations

  • Always apply the product in a well-ventilated closed room.
  • If the temperature is high and the air humidity is very high (65%+), then you may find it harder to rub the product well.
  • Let the ceramic coat bind with the paintwork for at least 6 hours. Avoid water, rain and other precipitations.
  • If the paintwork gets wet within the first 12 hours, dry it up gently with a microfibre cloth. Do not let the water dry by itself.
  • We recommend that you not wash the car for the next three days with any car care products.
  • Replace the applicator with a new one often.
  • Keep the product away from fire.
  • Wear gloves and a mask when applying the product.

Get some more useful advice from our video tutorial

How to use the product

Coating products

Tech Coat – Ceramic Coat

Do you want to know more?

Go ahead and write to us by e-mail or on social media.